DCD, DHT and creatinine: the three creatine impurities to check
What dicyandiamide, dihydrotriazine and creatinine are, where they come from in creatine production, the official limits, and what to ask a supplier.
On this page
A creatine monohydrate certificate that reads 99.9% purity still leaves 0.1% of something else. That is 1,000 parts per million, and what makes up those parts matters to anyone putting their brand on the label. Three by-products are checked most often: dicyandiamide (DCD), dihydrotriazine (DHT) and creatinine.
Where the impurities come from
Creatine is generally made industrially by guanylation of sarcosine: a guanyl group is transferred to sarcosine. One established route reacts cyanamide with sodium or potassium sarcosinate in water (US Patent 6,399,819). Side reactions, impurities carried in with technical-grade raw materials, and processing conditions can all leave by-products in the crude creatine. Purification removes most of them, and how much remains is one of the clearest differences between creatine grades.
Dicyandiamide (DCD)
DCD is a dimer of cyanamide: two cyanamide molecules that have reacted with each other instead of with sarcosine. It can also arrive with the raw material, because technical-grade cyanamide solutions generally contain about 5% dicyandiamide (US Patent 6,399,819). The level left in the finished powder reflects how well the reaction is controlled and how thoroughly the product is purified.
Dihydrotriazine (DHT)
DHT is a ring-shaped by-product of creatine synthesis. Little published safety data exists for it, so the cautious approach is to keep it below the detection limit of the test rather than within a numeric allowance.
Creatinine
Creatinine forms when creatine closes into a ring and loses a molecule of water. It is the same compound the body produces as it breaks down its own creatine, and it has no creatine activity. In a dry powder, creatinine points to the manufacturing and purification process, because creatine monohydrate powder itself is very stable in storage. Dissolved in water, creatine turns into creatinine much faster, especially at low pH (Jäger et al., 2011). Our article on storage and shelf life has the figures.
Reading the numbers
Impurities are reported in ppm (parts per million), which is the same as mg/kg. One percent is 10,000 ppm, so a purity of 99.961% leaves no more than 390 ppm for everything else.
| Parameter | Official limit (DK 126) | CreaPro® (TDS Sep-26) |
|---|---|---|
| Purity | ≥ 99.0% (dry basis) | ≥ 99.961% |
| Dicyandiamide (DCD) | ≤ 50 mg/kg | Not detected |
| Dihydrotriazine (DHT) | ≤ 20 mg/kg | Not detected |
| Creatinine | ≤ 1,000 mg/kg | ≤ 30 mg/kg |
| Lead | ≤ 2 mg/kg | ≤ 0.1 mg/kg |
| Cadmium | ≤ 1 mg/kg | ≤ 0.1 mg/kg |
What to ask a supplier
- A batch certificate of analysis, not only a technical data sheet. The data sheet gives the specification; the certificate shows what one batch actually measured.
- DCD, DHT and creatinine reported separately, each with its test method.
- The detection limit behind every “not detected”. The phrase means the result was below what the test can measure, so ask what that limit is.
- Heavy metals and microbiology: lead, cadmium, mercury and arsenic, plus total plate count, yeasts and molds, and pathogens.
- Who did the testing. An independent laboratory adds a second check on the supplier’s own results.
- Shelf life, storage conditions and batch traceability, so every finished lot can be traced back to its ingredient batch.
Where CreaPro® stands
The CreaPro® technical data sheet specifies a purity of at least 99.961% and total impurities of no more than 0.039%. DCD and DHT are not detected, creatinine is at most 30 ppm, and lead, cadmium, mercury and arsenic are each at most 0.1 ppm. CreaPro® is independently lab tested by SGS Global.
Every limit is listed on our Quality and Manufacture page, and the Formula page sets the three impurities beside premium creatine and the official limits.
Key points
- 99.9% purity still leaves 1,000 ppm of other substances: ask what they are.
- DCD comes from cyanamide, DHT is a synthesis by-product, and creatinine is creatine that has closed into a ring.
- “Not detected” is only as good as the test’s detection limit.
- CreaPro®: DCD and DHT not detected, creatinine at most 30 ppm, total impurities at most 0.039%.
Sources
- US Patent 6,399,819, Process for purifying creatine. Google Patents
- Danish Veterinary and Food Administration (Fødevarestyrelsen). Specifikation for DK 126 Creatin. 1 November 2004.
- Jäger R, Purpura M, Shao A, Inoue T, Kreider RB. Analysis of the efficacy, safety, and regulatory status of novel forms of creatine. Amino Acids. 2011;40(5):1369–1383. PMC3080578
- CreaPro® technical data sheet, edition Sep-26. Download the PDF
Purity, impurity limits, particle size and packaging, edition Sep-26.
Download the TDS Request samples